Wired/ Wireless Remote Based Motorized Robotic Arm
Movement Control
Project Description
The main goal of this project is to
design a robotic arm which is used to pick and place an object or heavy body
with less human efforts. The main components used in this project are motors,
connecting wires, switch, power supply and mechanical modal of arm. The arm can
move up, down, forward, backward. There is a jaw connected in front to pick and
palace the objects. For each movement motors are used which is controlled
through a switch pad. There is power supply which is used to power the motors.
RS.6500
Non Conventional Energy Sourcing & Electricity
Generation using Wind Mill
Project
Description
The main aim of this project is to generate the electricity
from wind energy. This project contains dynamo, belt, tower, Fan and led’s for
indicating the generation of electricity. The fan is fitted at the top of tower
which is further connected to the dynamo through a belt. The led’s connected to
the dynamo through an electronic circuit. When a wind strikes on the wings of
fan its starts rotating which rotates the dynamo shaft through a belt. The
dynamo converts the rotational energy into electrical energy. Electricity
generated by dynamo can be stored in a battery. This is indicating by led’s
connected to the dynamo. With the generation of the electricity the led’s
starts glowing. And its intensity will vary according to the speed of wind.
RS.8000
Hydraulic Actuators based Robotic Arm & movement
control Mechanism
Project
Description
The aim of this project is to design
a hydraulic arm, which is used for pick and place the object. The main components
used in this project are hydraulic cylinders with piston, pipes and a
mechanical model of the arm. In this project two hydraulic cylinders used for
each movement. These two cylinders connected through pipe. When the pressure is
applied onto the piston of one hydraulic cylinder it starts filling fluid into
the second cylinder with pressure, and the second cylinder piston connected to
the arm which moves the arm. For every movement a combination of two hydraulic
cylinders is requiring. In this project the arm moves up, down, forward and
backward direction. For pick and place a jaw is connected which is also drive
through these hydraulic cylinders.
RS.6500
